Honeywell Miller AirCore AAT-BC, Дополнение к руководству пользователя

Страница: 9 / 24

U s e r I n s t r u c t i o n M a n u a l S u p p l e m e n t - E n g l i s h
9
Tool loops are designed for the convenient at-
tachment of light tools and tool bags (Fig. 10).
Tools must have a means to connect to the loop
and should never hang freely without a closed
connection.
Tool loops are removable or replaceable, and
additional tool loops may be added. Simply
remove belt, change or add tool loops, and
reattach belt to harness.
WARNING: Belt must be properly re-
attached to harness, ensuring that all
points of attachment have been utilized
correctly (see Fig. 11a, 11b & 11c). Belt
must go through side D-rings, mating
buckles, and back web loop as shown.
6.0 Inspection
Inspect harness, including Bos’n chair, according to the Miller Harness and Body Belts
instruction manual.
$OZD\VLQVSHFWIRUWKH
absence of or alteration to any elements affecting
WKHHTXLSPHQWIRUP¿WRUIXQFWLRQDQGFKHFNIRUDQ\LQGLFDWLRQVRIGDPDJHWKDWPD\DIIHFWWKH
LQWHJULW\DQGRSHUDWLRQRIWKHSURGXFW,ILQGRXEWFRQWDFWWKHPDQXIDFWXUHU
Use of Tool Loops
Storage of Connecting
Device when Not in Use
Attach connecting device to
either the pull-free Velcro®
keeper (Fig. 12) or the pull-
free lanyard ring (Fig. 13).
Do not attach an unused
connecting device to any
other components of the
harness.
Fig. 10
Fig. 13
Fig. 11a, 11b & 11c
Fig. 12