GB
Honeywell Life Safety AS, Po. Box 3514, N-3007 Drammen, Norway
http://www.hls-nordic.com
MODULE FOR SINGLE LAMP SELECTION AND MONITORING
Switching of one selected light in the electric circuit
SET010 select
DIP-switch 1
ON for non-maintained mode
OFF for maintained mode (Default)
DIP-switch 2
OFF for lighting address 1-16 (Default)
ON for lighting address 17-32
Indicator LED
Rotary coding switch
for setting the exact lamp adress
DIP-switch 3 (OFF)
Attention!
Connect L and N correctly!
Exchanging L and N causes malfunction.
Function
Setting the lighting address is carried out by a rotary coding switch that is easily accessible from the
outside.
By means of a suitable control, it is possible with the aid of the SET010 select to determine whether the
lamp connected to it is ready for use or faulty.
In the mixed operation circuit, the connected lamp can also be additionally set in non-maintained mode
or maintained mode (DIP Switch 1).
The address range 17 to 32 can be selected by setting DIP switch 2 to ON.
The module is already prepared for administering a total of 32 lighting addresses.
Settings
Lighting addresses 1 to 16 can be slected when DIP switch 2 is set at OFF.
(DIP switch 2 = ON and rotary coding switch = 1 is equivalent to lighting address 17 etc.)
Technical description
Cross section:
Temperature:
Dimensions (L x W x H in mm)
78 x 30 x 20
2
Max: 1.5mm
-10°C up to +60°C, T
=+75°C
cmax
SET
010 select
Prewired
