Honeywell LeaderLine DPR 100 C, Руководство по эксплуатации продукта

Страница: 41 / 228

5-3
5. PRODUCT SPECIFCATION SHEET
Technical data
Alphanumeric documentation
Messages 12 freely assignable and configurable messages of 14 characters each,
including the specific German and Swedish letters.
Can be printed with the date/time on top of the traces by alarms, logic
inputs or communication.
Batch header One batch message of 4 lines of 14 characters, fully configurable, with
incremented batch numbers and date/time. Printed through digital input
and saved upon power interruption.
Process variable The traces can be assigned to analog input, mathematics calculations or
communication inputs, and are printed in channel color. Periodic digital
printing at time intervals configurable from 1 to 1440 minutes. Digital
print-out of PV values through alarms, digital inputs, communication or
front keyboard.
Tag name Each channel can be named by 8 characters
Event precursor
Stand-by The acquisition data is stored in a buffer memory. (FiFo)
A stand-by message is periodically printed.
Downloading On event (alarm, digital input, front key, communication) the data is
downloaded to be printed on the chart at pre-configured speed.
The history before and after the event represents about 50 mm of chart
paper.
Mathematics package
(optional) Many functions are available such as: - Energy consumption
- Basic mathematics functions - Vacuum pressure
- Square root - Averages
- Fo sterilization - Min., max.
- Totalization - Timers
- Mass flows - Carbon potential
The maths calculations and results are stored during power interrutpions
Digital communication (optional)
Protocols RS232 ASCII communication to PC application. RS422 or RS485 ASCII
communication output. RS422 or RS485 Modbus RTU communication
output.
PC supervision Through ASCII communication, application software gives the facility to
read PV's, alarms or event status, to store the information on a file, to
send a message to the recorder or to modify the product configuration.
Autodial The RS232 ASCII communication can dial automatically a phone number
of a remote station to send via modem an alarm message or a periodic
report.
Use of this feature can cause communications conflicts if data
acquisition software attempts to communicate with the recorder at the
same time. During an Autodial the recorder becomes the master on the
communications link.
Event The recorder can be configured to deliver an output signal (alarm relay)
on a recorder event such as burnout, paper cassette out, battery fail,
alarm condition, communication interrupted.