Honeywell JOSI-DBC012-N11, Руководство по установке

Страница: 22 / 40

22
Installing the Camera
Figure 1-9 Camera Assembly
Note After installing the camera assembly, you need to adjust and focus the
camera before installing the lower dome to complete the installation process.
To adjust and focus the camera, see
Adjusting the Camera on page 25 .
Note The lower dome might affect the focus. After installing the lower dome, you
should check the focus. If the focus needs adjustment, uninstall the lower
dome, make the adjustments, reinstall the lower dome, and then recheck the
focus.
Installing the Inner Dome Liner
1. Slide the inner dome liner on an angle into the lower dome so that one side fits
snugly into place.
Figure 1-10 Slide Inner Dome Liner into the Lower Dome
2. Push down on the other side until it snaps into place.
Loosen thumb
nuts (x3)
Gimbal chassis
Gimbal ring
Bracket tabs (x2)
In-Ceiling Pendant
1
2
1
2
Lower Dome
Inner Dome Liner
Inner Dome Liner