manualshive.com logo in svg

Honeywell IQ Force, Справочное руководство

Поделиться
Скачать
Honeywell IQ Force Скачать руководство пользователя страница 17

IQ Force™ Dock Reference Manual

9

Install IQ Administrator Pro, Database Manager, and PostgreSQL database.

NOTE

Do  not  launch  the  IQ  Force  dock  software  again  until 
the instruc tions in 

Section 2.5

 to 

Section 2.8

 below have 

been completed.

2.5 Install IQ Administrator Pro, Database 
Manager, and PostgreSQL database.

Proceed to the IQ Administrator Pro Reference Manual and follow the 

instructions to create and specify the PostgreSQL database.

2.6 Power and Connectivity

This section covers providing power to the IQ Force docks and connecting 

them to your PC. The instructions given below pertain to standard 

connections via the PC’s USB port.
IQ Force docks that are Ethernet-ready are shipped with an Ethernet 

Instruction booklet. Proceed to the Ethernet Instruction booklet if you are 

planning to connect the dock to the PC via Ethernet. Once the instructions 

in the booklet have been followed and the IQ Force dock is connected, 

return to 

Section 2.7

 for calibration-gas cylinder connection instructions.

2.6.1 PC – Single Dock via USB

For single dock setups that will be run from the PC via USB, the power from 

the PC via the USB cable is sufficient to power the dock. Simply connect 

the dock to the PC with the USB cable that was included with the dock and 

proceed to 

Section 2.7

 for instructions concerning calibration gas.

NOTE

USB cable length from PC to dock may not exceed 10 feet.

Install IQ Administrator Pro, Database Manager, and PostgreSQL database

Содержание IQ Force





























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды