Honeywell
Configuration
After you log in the system, you can see the following page. The system includes three
functional tabs, which are
Configuration
,
Search
, and
Reports
. On the top-right corner of
the page, you can select “Change password” or “Log out”, below which is the current version.
Figure 5-4 Configuration
The “Network configuration” page shows the corresponding IP address, subnet mask, and
gateway of the two network adapters. Change the parameters in the textboxes and click
Run
to save them, as shown in the following figure.
Figure 5-5 Configuration Successful
Note
If the IP address is incomplete or has a value greater than “255”, the
system will prompt the error information.
29
