Honeywell
4 Operations
Refer to the following table for the operations of the front panel screen:
Prompt Description
Power up and turn on the switch on the rear panel
of IP Receiver (No.12 in
Figure 2-2
). LEDs on the
front panel are lit in turn and the screen displays
“Starting…”.
Figure 1
When the system starts up normally, the screen
displays the module name, date and time.
Figure 2
Press
►
or
ENTER
to enter the menu, as shown in
the left figure.
Press
▲
and
▼
to go through menu items;
Press
►
or
ENTER
to select the menu item;
Figure 3
Press
◄
to return to idle-mode display.
Search alarm
In
Figure 3
, select “Search Alarm” and the left figure
is displayed.
There are three options for searching alarms: “All
Alarms”, “Reported Alarm” and “Unreported Alarm”.
Unreported Alarm: If IP Receiver is not connected
with CMS, all the alarms are stored in the database
of IP Receiver as unreported alarms.
Press
►
or
ENTER
to select the menu item;
Press
◄
or select “Return” to go to the previous
menu.
Figure 4
Figure 5
View mode
In
Figure 4
, select an option for searching alarms
and the left figure is displayed.
There are three view modes for each alarm type:
“Last Alarm”, “First Alarm” and “Search by Time”.
Press
►
or
ENTER
to select the menu item;
Press
◄
or select “Return” to go to the previous
menu.
24
