manualshive.com logo in svg

Honeywell IFP-2100, Инструкция по установке и эксплуатации

Поделиться
Скачать
Honeywell IFP-2100 Скачать руководство пользователя страница 99

LS10143-001SK-E

Network Management

6-2

Figure 6.1 for Network Diagnostics.

1.

Enter the Installer Code. The panel will automatically go to the main menu.

2.

Select 6 for Network Programming.

3.

Press 1 to enter the Learn Network menu.

4.

Press ENTER to add or remove panels connected to the network as member or guest.

Note: If adding panels to network, the system will automatically run the Sync Network Options. You will be re

-

quired to select which panel to distribute network options from. See Section 6.4.

6.2.2

Edit Network Names

The Edit Network menu allows you to edit the panel name and edit the panels site name.

To Edit Panel Names:

1.

Enter the Installer Code. The panel will automatically go to the main menu.

2.

Select 6 for Network Programming.

3.

Press 2 to enter the Edit Network Names menu.

4.

 Press 1 to Edit Panel Name. Choose Panel to edit.

See Appendix B for a list of available characters and their numeric designators.

6.2.3

Edit Panel ID

This menu option allows you to change the current Network Panel ID. It is best to carefully consider the network 
ID setting for each panel. Take into account any future panels that will be added to the network (future wiring of 
two buildings together). The Network Panel ID setting has to be unique for each panel on the network.

This menu will allow you to change the currently assigned Network Panel ID to the current Network ID dip 
switch setting. The system will be down as the panel needs to reboot in order to complete the transition.

When using the PC configuration software to program the panels, the Network Panel ID will be locked from 
future editing. The only way to change it will be to restore defaults and use this menu again.

To Edit the Network Panel ID:

1.

Enter the installer code. The panel will automatically go to the main menu.

2.

Select 6 for Network Programming.

3.

Press 3 to enter the Edit Panel ID menu.

4.

If the Network Panel ID is changed and valid, the system will ask you to confirm the change. If it is not cor

-

rect, you can change the dip switches at this time.

5.

Press up to select YES and press ENTER to confirm.

6.2.4

Computer Access

An installer at the panel site can initiate communications between the panel and a computer running the HFSS 
Honeywell Fire Software Suite (see also Section 10.5). In order for this communication to function properly, 
both the computer (running the software) and the control panel must have matching computer access numbers 
and computer codes.

To program computer access information:

Содержание IFP-2100









































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды