Honeywell HR24TLX, Руководство по установке

Страница: 20 / 33

English-19
TIMER RECORDING
* “DLY” (in “Day of the week”) is used for the same
time recording everyday.
* A 24-hour display is used. 00 : 00 indicates
midnight ; 12 : 00 midday and 15 : 00 3 o’clock in
the afternoon.
* If the recording
times of two
programs overlap,
the later program
is given a priority, which means some of A
program will be lost.
* In Linear REC mode, sound is also recorded.
* DAY mode covers MON, TUE . . . . . SAT, SUN, M-
F (MON-FRI) and DLY (Daily).
If an error is encountered when the TIMER button is pressed, refer to the following table.
“EJECT No tape” • Check if a tape • Insert a recordable tape that
on screen. is not inserted. has safety tab on it.
“Stop No safety tab” • Check if the tape lost • Replace with a tape with safety
on screen. safety tab. tab on it. •Attach the safety tap.
“Stop No timer • Check if timer programs are • Input any timer programs to
programs” on screen not input in timer program. record in timer program.
Symptom Check points Things to do
No
display
of .
Press the MENU button to display the main menu on the monitor.
1
Press the MOVE button continuously until comes to CLOCK / TIMER position.
2
Press SELECT button. And press MOVE button continuously until comes to
PROGRAMMING position. Then press SELECT button.
3
When TIMER PROGRAM CHART appears on the monitor, press the SELECT button again.
ON( or OFF)will blink.
To disregard the timer program, set OFF.
4
Record the desired timer program by pressing (+) or (-) button.
To move to the next position, press SELECT button.
5
When you finished above process, press the MENU button to exit from TIMER
PROGRAM. Then press TIMER button to activate TIMER PROGRAM. The power will be
off and
will be displayed.
6
DAY START END SPD
OFF --- --:-- --:-- ---
OFF --- --:-- --:-- ---
OFF --- --:-- --:-- ---
OFF --- --:-- --:-- ---
OFF --- --:-- --:-- ---
OFF --- --:-- --:-- ---
OFF --- --:-- --:-- ---
OFF --- --:-- --:-- ---
[ ][ ][CLEAR] [MENU] EXIT
HOW TO AVOID MISTAKES WHEN USING THE TIMER