Honeywell HR24TLX, Руководство по установке

Страница: 15 / 33

English-14
MANUAL RECORDING ( CONTINUED )
When the REC button is pressed, the recording mode is switched in the order of below table.
During recording, press the PLAY button. The tape will rewind a little and then play the
recording just made. When the tape reaches the position where the REC CHECK button was
pressed, the VCR returns to record mode. While REC CHECK is executed telerecording is not
carried out.
RECORDING MODE
RECORDING CHECK FUNCTION
• Apply the specified line input signal to the AUDIO IN connector.
• Available recording hours are shown above.
AUDIO RECORDING
• For Audio ON/OFF setting, use AUDIO ON/OFF button on the front panel.
• Except for 3H while verifying the audio sound of the recorded tapes the picture quality
cannot be as good as on Audio OFF for the characteristic of linear tape speed.
AUDIO PLAYBACK
When the LOCK is set to on, the control buttons will not operate and the VCR is kept in the
current mode . To release the lock mode, the LOCK is set to off.
REC LOCK MODE
REC/PLAY Actual rec/ Play hours
Recording Interval Number of Rec fields
Audio
MODE E-180 E-240 recording
L3H 3H 4H 0.02s/f 50 f/s yes
L15H 15H 20H 0.1 s/f 10 f/s yes
L27H 27H 36H 0.18 s/f 5.56 f/s yes
48H 51H 68H 0.34 s/f 2.94 f/s no
72H 75H 100H 0.5 s/f 2 f/s no
120H 123H 164H 0.82 s/f 1.22 f/s no
168H 171H 228H 1.14 s/f 0.88 f/s no
240H 243H 320H 1.62 s/f 0.62 f/s no
480H 483H 644H 3.22 s/f 0.31 f/s no
960H 963H 1284H 6.42 s/f 0.16 f/s no
PAL
•Linear REC mode : L3H, L15H, L27H