User Manual of Explosion-Proof PTZ Camera
54
defined by a preset to another, without showing the middle areas between these two, to
ensure the surveillance efficiency. It can also reduce the use of bandwidth in a digital
network system.
Preset freezing function is invalid when you calling a pattern.
Preset Speed:
You can set the speed of a defined preset from 1 to 8.
Manual Control Speed
: The manual control speed can be set as Compatible, Pedestrian,
Non-motor Vehicle, Motor Vehicle or Auto.
Compatible: The control speed is same as the Keyboard Control Speed.
Pedestrian: Choose the
Pedestrian
when you monitor the pedestrians.
Non-motor Vehicle: Choose the
Non-motor Vehicle
when you monitor the non-motor
vehicles.
Motor Vehicle: Choose the
Motor Vehicle
when you monitor the motor vehicles.
Auto: You are recommended to set it as
Auto
when the application scene of the
Explosion-Proof PTZ Camera is complicated.
Keyboard Control Speed:
Define the speed of PTZ control by a keyboard as Low, Medium
or High.
Auto Scan Speed:
The scan speed can be set from level 1 to 40.
M
ax. Tilt-angle
: Set the tilt-angle of the Explosion-Proof PTZ Camera from the dropdown
list.
Zooming Speed
: The zoom speed is adjustable from level 1 to 3.
PTZ OSD:
Set the on-screen display duration of the PTZ status.
Zoom Status:
Set the OSD duration of zooming status as 2 seconds, 5 seconds, 10
seconds, NC (Normally Closed), or NO (Normally Open).
PT Status:
Set the azimuth angle display duration while panning and tilting as 2 seconds,
5 seconds, 10 seconds, NC (Normally Closed), or NO (Normally Open).
Preset Status:
Set the preset name display duration while calling the preset as 2 seconds,
5 seconds, 10 seconds, NC (Normally Closed), or NO (Normally Open).
Power-off Memory:
The Explosion-Proof PTZ Camera can resume its previous PTZ status or
actions after it restarted from a power-off. You can set the time point of which the
Explosion-Proof PTZ Camera resumes its PTZ status. You can set it to resume the status of 30
seconds, 60 seconds, 300 seconds or 600 seconds before power-off.
3.
Click
to save the settings.
5.4.2
Configuring PTZ Limits
Purpose:
The Explosion-Proof PTZ Camera can be programmed to move within the configurable PTZ limits
(left/right, up/down).
Steps:
1.
Enter the Limit configuration interface:
