Honeywell HDZ302LIK, Руководство по настройке

Страница: 23 / 38

Configuring Camera Settings Using the OSD | 23
800-21699 - A - 04/2016
PATTERN
Move the cursor to PATTERN and click the confirm button to go to the submenu, where you can
view or modify the following settings:
Note The dwell time between two commands should be less than one minute, otherwise
the system will set the default value as one minute. After selecting SETTING STOP, do
not use the CALL function until the "?" icon completely disappears. Any manual PTZ
control inputs during a pattern procedure will cause it to stop running.
IDLE MOTION
Move the cursor to IDLE MOTION and click the confirm button to go to the submenu, where you
can view or modify the following settings:
AUTO RUN (SCHEDULE TASK)
Move the cursor to AUTO RUN and click the confirm button to go to the submenu, where you
can view or modify the following settings:
• PATTERN NO Sets the pattern number. Click the left/right button to set.
• SETTING At the prompt, begin the pan/tilt/zoom operations that you
want the system to memorize as a pattern.
• SETTING STOP To stop memorizing a pattern, move the cursor to SETTING
STOP, and then click the confirm button.
• CALL Input the pattern number, move the cursor to CALL, and then
click the confirm button to begin running the pattern.
• STOP Move the cursor to STOP and click the confirm button. The
current pattern stops running.
• IDLE ACTION The camera will execute the preset action if it didn't receive any
valid command during set time.
• IDLE TIME Sets the idle time. Click the left/right button to set.
• ACTION TYPE Options include: NONE, PRESET, SCAN, TOUR, and
PATTERN. Click the left/right button to set.
• SN Sets the idle motion SN. System can implement the
corresponding action when it is idle for the specified period.
Click the left/right button to set.
• TASK NO Sets the task number. Click the left/right button to set.
• TIME TASK Sets the time task ON/OFF. Click the left/right button to set.
• TASK SETTING Sets the task begin time, end time, action type, and so on. See
below for more details.
• TASK INFORMATION Select the confirm button to view task information.
• DELETE TASK
Input the task number, move the cursor to DELETE TASK, and
then click the confirm button.