Rev 1.00
9
Document 900.0510
05/06
Attaching the Dome Cover
To attach the dome cover, follow
1.
Use a soft, lint-free cloth to wipe the dome cover clean and remove
fingerprints.
2.
Attach the inner liner (#3) to the Tilt adjustment screw (#2). Push
down until it clicks into place.
3.
Place the dome (#4) on the unit. Make sure all three dome tabs (#5)
are inside the housing opening.
4.
Turn the dome gently clockwise until it locks in place.
Figure 6
Dome Installation
1
3
4
2
Legend
1
Camera housing
2
Tilt adjustment bracket and thumbnuts
3
Inner liner
4
Dome cover
5
Dome tabs (x3)
5
