Rev 1.00
6
Document 900.0510
05/06
Adjusting the Camera Position
Figure 4
Camera Position Adjustment
1.
Loosen the Tilt adjustment thumbnuts (see #1 on
). Turn one
Tilt adjustment thumbnut counter-clockwise and one clockwise.
2.
Turn the Tilt adjustment bracket (#1) and Axis ring (#2) in the desired
direction, then retighten the thumbnuts.
3.
Loosen the Zoom lever (#3) counter-clockwise a little, then rotate the
Zoom lever and determine the image view.
4.
Loosen the Focus lever (#4) counter-clockwise a little, then adjust the
focus for optimum picture sharpness.
5.
Re-tighten the Zoom lever and Focus lever after adjustment.
6.
Repeat
until the desired range and focus are set.
Legend
1
Tilt adjustment bracket and
thumbnuts (x2)
2
Axis ring
3
Zoom lever
4
Focus lever
1
2
3
4
