Rev 1.00
8
Document 900.0510
05/06
Picture Brightness
Use the LEVEL screw (#1) to compensate for the iris
level. L (low) makes the picture darker. H (high) makes the picture brighter.
Phase Adjustment
Use the V Phase Adjustment Pot (#2) to adjust the
phase difference between cameras. Make sure Switch 4 is ON to activate
the Line lock function (AC operation only).
DIP Switches
Set the DIP switches (#3) to activate or deactivate the
following functions:
Switch
Function
1
BLC (Backlight Compensation). Set to ON to have the
camera adjust the exposure to compensate for situations
where the subject is lit from behind. The factory default setting
is OFF.
2
AGC (Automatic Gain Control). Set to ON (default) to have the
camera adjust the picture for low light conditions.
3
DC/AES Mode. Leave in ON position only.
4
LL (Line Lock). Set the camera synchronization to internal or
line lock (line lock is only available with 24 VAC). The factory
default setting is ON.
