Honeywell HCM-750, Инструкция по технике безопасности

Страница: 3 / 27

3
SETTING UP YOUR HUMIDIFIER
Placement
Select a firm, level location at least 6" (15cm) from any
walls for proper airflow. Place the humidifier on a water-
resistant surface, as water can damage furniture and some
flooring.
Kaz will not accept responsibility for property damage
caused by water spillage.
Filling
Fill pitcher or jug with up to
1.5 gallon of cool water.
Note: You can fill this
humidifier with as much
as 1.5 gallon of water or
as little as a cup of water.
Pour water into the fill funnel
area located on the top of
the unit.
Indications that your humidifier
needs to be refilled are:
- Water will stop circulating
through the water channel.
- Your humidifier will start to
sound louder.
- Water level is not visible in
water window or below the
refill line
Figure 1
Figure 2
Remove from box
Remove packaging material. Remove and set aside instruction
manual. Recycle box and packaging materials or save box for
end of season storage.
To prevent water pump from shifting during transportation
it has been taped to the inside of your humidifier. Remove
grille and filter tray and locate the water pump on the bottom
of the main housing. Remove shipping tape located on water
pump and place water pump back in slot.
Replace filter tray and grille on top of main housing.
Make sure it is securely in place and hose is not bent or
crimped or unit will not operate.