Honeywell GSMX4G, Инструкция по установке и настройке

Страница: 18 / 40

GSMX4G / GSMXCN4G Installation and Setup Guide
– 16 –
PROMPTS ENTRY OPTIONS DESCRIPTION
7
Verify
Password
[0-9, A-F,
N, S, T, X,
Y]
Re-enter the password as
confirmation.
If the password doesn't match the
first entry, the following is
displayed followed by the "Exit
Prog. Mode?" prompt:
Verify Not OK
PSWD not created
Otherwise, the "Exit Prog. Mode?"
prompt is displayed directly.
8
Exit Prog.
Mode?
(Y/N)_
[Y], [N]
[ESC] Exits program mode.
Press [N] to go back to Prompt 3.
Press [ESC] to load factory
defaults.
Refer to the
Exiting the
Programming Mode topic.
9
Device
Mode
(ECP)_
•
ECP
• 4204
Emu
• Two
4204s
Press the [space] key to scroll
through the modes of operation
.
Press [ENTER] to select the
desired mode.
ULC NOTE: Must be ECP.