Honeywell Gent Vigilon Compact, Руководство по эксплуатации

Страница: 20 / 44

Fault conditions
A fault in the local system such as a failure of the mains power to the panel or removal of any monitoring device
will cause a Fault condition at the control panel. The control panel will provide details of the fault event, this
event indication is repeated at all networked control panel, repeat indicators and mimic panels in the system.
To cancel fault
buzzer
You can stop the panel buzzer from sounding.
Press:
Display reads:
'Buzzer cancelled'
What must be
done?
You need to ensure the panel is returned to
normal condition. All fault repairs must be
undertaken by engineers responsible for the
system. Refer to the contact details in the log
book.
Record the event
Make an entry in the log book of the event for
future reference.
Multiple faults
The number ‘ n ’ following the word 'Fault'
located on the top left of the display denotes the
number of faults present in the system.
Each fault is logged in the Historic Events log,
which can be recalled using the menus, see
How to view the Historic Events.
&
Only a trained engineer who is responsible for the fire alarm system
must attempt any fault rectification work. For advice please call your servicing
organisation, see contact details in the Log book.
20
Operating instructions
15:45
Panel
buzzer
On
Flashing
Fault 1
Time:13:45.44
Tue 18 December 2007
Monitored input O/C
Fault
Fire
Verify
Sounder
CB253
CB254
Power
Power Fault
System Fault
Delay
Test
Disablement
Key:
Cancel Buzzer