Honeywell Gent Vigilon Compact, Руководство по эксплуатации

Страница: 15 / 44

How to announce emergency messages
If an emergency situation should occur, you can announce 'fire alert', 'fire evacuate'
and 'bomb alert' messages to selected local voice alarm zones.
15
Vigilon
COMPACT VOICE ALARM
or
Evac.
Alert
Bomb
.
Press the required
button:
No.1 ALERT
(if selected its red LED will be On)
No.2 EVACUATE
(if selected its red LED will flash)
No.3 BOMB
(if selected its red LED will flash)
Notice also that the LEDs of the selected
buttons are lit giving either
steady or flashing indication depending on
the
message number selected.
The VA Activated LED is lit and the system
will sound an attention tone followed by the
selected emergency message, this sequence
will be repeated until the alarms are silenced.
Emergency message
Voice Alarm Zone
Select the in which the
emergency message are to be announced,
notice that the two green-red LEDs on either
side of the button flash alternately.
Voice Alarm Zones
Ceiling
loudspeaker
Silence Alarms
Open the panel door.
1
n
Voice Alarm Zones
All Zones
Or
On
Flashing
n
Emergency messages
2
Evacuate
n
3
Bomb
1
Alert
n
When the emergency is over and to stop the
announcement, press the
button.
Silence Alarms
Factory default Standard messages
“An incident has been reported in this building please await further
instructions."
Evacuate message follows an attention tone:
Alert message :
“This is a fire alarm please leave the building immediately by the nearest
available exit.”
follows an attention tone
Bomb alert message :
"May I have your attention please, an incident has been reported in the area,
as a precaution please move away from all windows, further information will
follow shortly."
follows an attention tone
Attention tone followed by
announcement of
Pre-recorded messages
VA Activated
If you need to deselect a selected
zone then press the button again.
To select all zones press the All
Zones button and note the All Zone
green next to the button is lit.
"