4188-1075 issue 3_Part 2_08/14
Loop Loading
Gent by Honeywell reserves the right to revise this publication from time to time and make changes to the content hereof
without obligation to notify any person of such revisions of changes.
Hamilton Industrial Park, Waterside Road, Leicester LE5 1TN, UK.
Website: www.gent.co.uk
Telephone: +44 (0) 116 246 2000
Tech. Support www.gentexpert.co.uk
Fax (UK) +44 (0) 116 246 2300
10
WEEE Directive:
At the end of their useful life, the packaging, product
and batteries should be disposed of via a suitable
recycling centre.
Do not dispose of with your normal household waste.
Do not burn.
At the end of their useful life, the packaging,
product and batteries should be disposed of
via a suitable recycling centre and in
accordance with national or local legislation.
Difference between new and old Vigilon 4/6 loop panel hardware
To enable the new loop card to supply the full alarm load in a system having Vigilon 4/6 loop panel we need the new power supply,
backplane and loop card. The following photos show where to look to identify old and new parts.
2211-187
V4.xx
Older build of Vigilon PSU
(VS-PSU-24) or
(VS-PSU-72)
Post July 2013 build of Vigilon PSU
Older build of build
of Vigilon LPC
Post March 2014 build
of Vigilon LPC
(VIG-LPC-EN)
(VIG-LPC)
[Card]
[Status]
[Info]
How to check which Loop Processor Card is fitted
in the Vigilon panel
a) Find the loop card status under the Info menu.
b) Observe if the loop card is (1) or (2).
[E]
{ }
Params
0-15
[C]
LPC can be
Card 1 to 6
[Q]
Card 1: Fault 0: Disable 0: Warning 0
Loop card (2) Version 4 .48 23\9\2013
Loop Started: loop Compl ete
z Devices: 0 Teebreakers
0V resistance is xxR, L is y
(1) VIG-LPC build (Old loop card)
(2) VIG-LPC-EN build (New loop card)
Older build of
Vigilon Backplane
Post July 2013 build of
Vigilon Backplane
SEC-
GEN L
OOP CARD
Labels with
Software version
and part numbers
Older loop card will not display resistance and L values
