Security (cont'd)
11
To cancel an alarm, fault or tamper:
ICON
ACTION
NOTES
1.
On the
Home
screen, press the
Security
icon.
2.
Enter a valid
PIN
(Personal Identification Number)
code, and then press
ent
.
The buzzer will be silenced and the cause of the
activation will be displayed.
Any alarm, fault or tamper condition that has not been cleared is shown
each time a PIN is entered. When the condition is first activated, you
are alerted by the keypad buzzer.
Note:
After an alarm, fault or tamper has occurred the system must be reset in order to be used again.
To reset the system after an alarm, fault or tamper:
ICON
ACTION
NOTES
1.
Clear the cause of the alarm, fault or tamper. (A call to
your installer may be required)
2.
On the
Home
screen, press the
Security
icon.
3.
Enter a valid
PIN
(Personal Identification Number)
code, and then press
ent
.
4.
On the keypad, view the alarm, fault or tamper
conditions.
5.
Press the
Reset
icon.
If the condition has cleared and your PIN has sufficient
authority then the alarm, fault or tamper is reset.
Содержание Galaxy TouchCenter Plus
Страница 1: ...Galaxy TouchCenter Plus User Guide 800 18270 Rev A ...
Страница 2: ......
