35
FS20X Fire and Flame Detectors
Alarm Condition
When an alarm condition occurs, the red LED shown in
will turn on. The
factory setting for the auxiliary relay is 5 seconds.
Figure 28. Red LED location
Alarm condition outputs
●
Alarm Relay activation
●
Auxiliary Relay activation
2
only one active alarm output from this group:
●
4-20 mA (sink 16 mA) Alarm Output
●
4-20 mA (source 16 mA) Alarm Output
●
4-20 mA (sink 20 mA) Auxiliary Output
●
4-20 mA (source 20 mA) Auxiliary Output
only one active alarm from this group:
●
RS-485 FireBusII Alarm Notification
●
RS-485 ModBus Alarm Notification
2 verified alarm output
Содержание FS20X Series
Страница 4: ...4 FS20X Fire and Flame Detectors ...
Страница 47: ......
Страница 48: ...1998M0902 Revision F 2017 2018 Honeywell Analytics ...