Honeywell FMZ Series Скачать руководство пользователя страница 66

Страница: 66 / 542

Flight Management System (FMS) for the Agusta AW139/AB139 Helicopter

A28--1146--181

REV 3 Mar 2009

3-25

System Components

Honeywell International Inc. Do not copy without express permission of Honeywell.

—

UNABLE APPROACH MOD -- This is an advisory operator

message indicating the attempted lateral flight plan revision to

the approach segment is not permitted.

—

UNABLE AUTOTUNE -- This is an alerting system message

indicating the NAV frequency is not the same as the FMS

autotuned frequency.

—

UNABLE HOLD CHANGE -- This is an advisory operator

message indicating the pilot attempted to make changes to the

holding pattern definition while in holding and not on the inbound

leg.

—

UNABLE MANUAL CLOCKSET -- This is an advisory operator

message indicating the FMS is not the master of the time and is

not able to adjust the date or time.

—

UNABLE NEXT ALT -- This is an alerting system message

indicating the aircraft is unable to meet the altitude constraint.

—

UNABLE OFFSET -- This is an advisory operator message

indicating the pilot attempted to insert an offset while holding, a

standard terminal arrival route (STAR) or a standard instrument

departure (SID).

—

UNABLE PCDR TURN CHANGE -- This is an advisory operator

message indicating the pilot attempted to adjust the procedure

turn after sequencing on to the procedure turn.

—

UNABLE RNP -- This is an alerting system message indicating

the estimated position uncertainty (EPU) is greater than the

RNP.

—

UNABLE RNP NEXT WPT -- This is an alerting system message

indicating the current EPU exceeds the RNP required at the next

waypoint.

—

UNABLE TO SEND DOWNLINK -- This is an advisory system

message indicating the time for the FMS to wait for a network

acknowledge for a linked message has expired.

—

UNABLE TUNE REQUEST -- This is an advisory operator

message indicating the pilot has entered a frequency while the

radios are in the manual mode.

—

UNABLE *PD PLACEMENT -- This is an advisory operator

message indicating the placement of the *PD waypoint fell within

an area that can not have *PD waypoints. For example,

procedure turns and arc turns.

Содержание FMZ Series































































































































































































































































































































































































































































































































































Результаты поиска

Содержание FMZ Series

Отзывы:

Похожие инструкции для FMZ Series

Бренды по названию

Популярные бренды

Honeywell FMZ Series, Руководство пилота

Результаты поиска

Содержание FMZ Series

Отзывы:

Похожие инструкции для FMZ Series

Бренды по названию

Популярные бренды