Honeywell FMZ Series Скачать руководство пользователя страница 319

Страница: 319 / 542

Flight Management System (FMS) for the Agusta AW139/AB139 Helicopter

A28--1146--181

REV 3 Mar 2009

6-161

Navigation

Honeywell International Inc. Do not copy without express permission of Honeywell.

Search Pattern Construction

Search pattern legs and radials are constructed with TF legs (great

circle track to a fix over the ground) using the pattern definition

attributes specified on the search pattern definition page.

The SAR waypoints are defined and inserted in the active flight plan

according to the type of SAR waypoint and are as follows:

Search pattern approach waypoints are named *SPAPx.

The initial fix or start position waypoint is named *SPSTx. On the

MCDU active flight plan page and MFD, the FMS designates the

start of the search with SPSTx rather than the original name of the

waypoint used to define the start of the search pattern.

The last waypoint (exit point) in the search pattern is named

*SPEXx.

Waypoints in between SPSTx and SPEXx are consecutively

numbered (000, 001, 002, and so on) and named *SPxxx, where xxx

is the number of the search pattern waypoint after the start waypoint

to the end of the search pattern.

All search pattern waypoints except the search pattern entry and

exit waypoints (SPAPx, SPSTx, SPEXx) are displayed on the MFD

with the waypoint number only (for example, SP005 is displayed as

005).

A discontinuity is appended to the end of the search pattern and

inserted immediately before the waypoint at which *SEARCH* was

entered.

All flight plan waypoints beginning with the waypoint at which

*SEARCH* was placed is retained and shifted down.

Search Pattern Operation and Guidance

When a search pattern becomes active, the FMS provides guidance to

transition the aircraft onto the search pattern beginning at the pattern

start position or approach waypoint and continues until the search

pattern exit point.

A CHECK SAR SPEED scratchpad message is displayed when the

FMS determines the helicopter is not able to achieve the SAR speed

target before reaching the start of the search pattern. The SAR speed

target is the predicted speed for SAR approach waypoints and SAR

waypoints.

Содержание FMZ Series































































































































































































































































































































































































































































































































































Результаты поиска

Содержание FMZ Series

Отзывы:

Похожие инструкции для FMZ Series

Бренды по названию

Популярные бренды

Honeywell FMZ Series, Руководство пилота

Результаты поиска

Содержание FMZ Series

Отзывы:

Похожие инструкции для FMZ Series

Бренды по названию

Популярные бренды