Honeywell FMZ Series Скачать руководство пользователя страница 61

Страница: 61 / 542

Flight Management System (FMS) for the Agusta AW139/AB139 Helicopter

A28--1146--181

REV 3 Mar 2009

System Components

3-20

Honeywell International Inc. Do not copy without express permission of Honeywell.

—

EXCEEDS MAX LANDING WT -- This is an alerting system

message indicating the landing weight exceeds the maximum

landing weight.

—

EXITING POLAR REGION -- This is an alerting system message

indicating the FMS position just crossed below 88 degrees

north/south latitude and special polar rules no longer apply.

—

FLIGHT PLAN FULL -- This is an advisory system message

indicating the flight plan is full. This message is displayed when

the pilot attempts to enter more than the maximum waypoints

allowed in a flight plan.

—

FLT PATH ANGLE TOO STEEP -- This is an alerting system

message indicating the flight path angle exceeds the angle limit.

—

FLT PLAN CHANGED -- This is an advisory operator message

indicating the pattern fix is not in the same location as when the

page was entered while activating a pattern in a stored flight plan.

—

FLT PLAN RECEIVED -- This is an alerting system message

indicating a flight plan has been received through a datalink,

This message is displayed when datalink indicates a new flight

plan has been received.

—

FMS EXITING HOLD -- This is an alerting system message

indicating the hold termination altitude has been reached and the

HOLD is automatically exiting.

—

FMS POSITIONS DIFFERENT -- This is an alerting system

message indicating the reason for going into independent

operation is a difference in the FMS present position of greater

than 10 NM.

—

FMS USING GPS X -- This is an advisory system message

indicating the GPS has become available again for the FMS

navigation solution and X represents the GPS number.

—

FPL CONTAINS INVALID WPT -- This is an advisory operator

message indicating the stored flight plan being activated has

undefined or invalid waypoints.

—

FPL STORAGE FULL -- This is an advisory operator message

indicating the storage area for flight plans is full.

—

GPS RAIM ABOVE LIMIT -- This is an alerting system message

indicating the GPS current RAIM (receiver autonomous integrity

monitor) exceeds the alarm limit for the present phase of flight.

Содержание FMZ Series































































































































































































































































































































































































































































































































































Результаты поиска

Содержание FMZ Series

Отзывы:

Похожие инструкции для FMZ Series

Бренды по названию

Популярные бренды

Honeywell FMZ Series, Руководство пилота

Результаты поиска

Содержание FMZ Series

Отзывы:

Похожие инструкции для FMZ Series

Бренды по названию

Популярные бренды