Honeywell FF-LS082802362, Руководство по установке

Страница: 11 / 46

11
107022-16 EN FR26 GLO 301 Printed in Germany
Figure 2-1 Control and sensing unit compatibility
16 16
FLS23.EPS
Each sensing unit must be connected to a specific control unit per Table 2-1.
INCOMPATIBILITY OF FF-LS SERIES SAFETY CONTROL UNITS
DO NOT connect a different control unit other than the one specified (see table below) to the sensing units.
Failure to comply with these instructions could result in death or serious injury.
Table 2-1 Control unit and sensing units compatibility
Control unit 30 mm resolution sensing unit 14 mm resolution sensing unit Number of beams
FF-LS08C FF-LS082802362A/B -- 08
FF-LS16C FF-LS162804602A/B FF-LS16141962A/B 16
FF-LS24C FF-LS242806842A/B -- 24
FF-LS32C FF-LS322809082A/B FF-LS32143782A/B 32
FF-LS40C FF-LS402811322A/B -- 40
FF-LS48C FF-LS482813562A/B FF-LS48145612A/B 48
FF-LS56C FF-LS562815802A/B -- 56
FF-LS64C FF-LS642818042A/B FF-LS64147442A/B 64
2.2.3. Unit identification plates
Figure 2-2 Control unit rating and approvals plate
Label indicates the
number of beams. This
number must be the
same number that is on
the sensing units red
label.