HD4 EQUIP Series True Day/Night Rugged IP Network Camera User Guide
Document 800-07496V2 Rev A
67
11/2011
Alarm Settings
Connect external devices such as sirens or flashing lights to the alarm output connector to
signal camera users that an alarm is activated. Set the
Alarm Output
as
Normally Open
or
Normally Close
. See
for more information.
When alarm inputs are connected, the camera triggers an alarm only when the normal state
(open or closed) changes. An alarm message appears on the web client screen (see
Audio Settings
The network camera supports bi-directional audio. There are two supported voice band
channels that function in full duplex mode. Connect industry-standard line level audio input
and output to the back of your camera. See
for more
information.
Audio configuration for your network camera is straightforward.
Figure 4-20
Audio Settings
To listen to or capture audio from the camera, enable the
Camera to Client (PC)
check box
(
). To listen to audio from the client (PC), enable the
Client (PC) to
Camera
check box.
Содержание EQUIP HD4HDIH
