Honeywell EQUIP HD4HDIH, Руководство пользователя

Страница: 39 / 90

HD4 EQUIP Series True Day/Night Rugged IP Network Camera User Guide
Document 800-07496V2 Rev A 39
11/2011
Figure 3-4 Set the IP Network Settings Automatically or Manually
Note All examples in this User Guide show the GUI for the HD4MDIH model
camera, unless otherwise specified.
Table 3-4 IP Network Device Setting Options
Option Description
Device Name By default, the device name is the device type plus the MAC Address. Honeywell
recommends, for security, that you change the device name.
MAC Address The MAC address is a factory-assigned address that is unique for each device.
IP Address The IP address of the device on the network.The camera obtains an IP address
by static or dynamic (automatic) means. There are two ways: Dynamic
(DHCP/APIPA), which is automatically assigned by the network administrator, or
Static (static), which is assigned by the user.
Subnet Mask The subnet mask, or netmask, value of the device on the network. IP networks
can be divided into several smaller networks by subnetting. When a network is
subnetted, you must specify a subnet mask, which tells network devices which
smaller network they belong to.
Note If the subnet mask is not properly configured, the camera might not be
able to communicate with other devices on the network.
Default Gateway The default gateway address that connects the device to the network. Enter the
IP address of the host to use as a gateway between networks. The gateway
allows communication between devices that are on different networks. Without a
correct gateway setting, the camera cannot receive or transmit data from or to
devices that are not in the same network address range.
Click to clear this checkbox and
manually set the network details