Honeywell EC7823A Скачать руководство пользователя страница 1

INSTALLATION INSTRUCTIONS

66-1086-2

® U.S. Registered Trademark
Copyright © 2003 Honeywell International Inc.
All Rights Reserved 

EC7823A;RM7823A

7800 SERIES Relay Modules

APPLICATION

The Honeywell EC/RM7823A Relay Module is a 

microprocessor based flame detector relay that can be fitted 

with any 7800 SERIES Flame Amplifier to provide relay action 

from one dpdt relay when flame is or is not present. The 

EC/RM7823A system consists of a relay module, wiring 

subbase and flame amplifier. Options include keyboard 

display module (KDM), personal computer interface, Data 

ControlBus Module™, remote display mounting and 

Combustion System Manager™ Software. 

Functions provided by the EC/RM7823A include flame 

monitoring, self-diagnostics and troubleshooting.The 

EC/RM7823A is a solid state replacement for the R7023B,C 

Flame Detector Relays.

The EC7823/RM7823 is a flame detector relay only. A 

switchable primary control must be used to provide safe-start 

check, safety lockout, load switching and other functions 

required in Flame Safeguard systems.

This document provides installation and static checkout 

instructions. Other applicable publications are:

SPECIFICATIONS

Electrical Ratings, see Table 3:

Voltage and Frequency:

EC7823A: 220-240 Vac +10%/-15%, 50/60 Hz ±10%.

RM7823A: 120 Vac, +10%/-15%, 50/60 Hz, ± 10%.

Power Dissipation:

10W maximum.

Maximum Total Connected Load: 2000 VA.

Fusing: Total Connected Load: 15A, type SC, Fast Blow, or 

equivalent.

Environmental Ratings:

Ambient Temperature:

Operating: -40°F to 140°F (-40°C to +60°C).

Storage: -40°F to 150°F (-40°C to +66°C).

Humidity: 85% relative humidity continuous, noncondensing.

Vibration: 0.5G environment.

Approvals:

RM7823A:

Underwriters Laboratories Inc. Listed: File No. MP268, 

Guide No. MCCZ.

Canadian Standards Association Certified: LR9S329-3.

Factory Mutual Approved: Report No. J.I.1V9A0.AF. 

IRI Acceptable.

Federal Communications Commission: 

Part 15, Class B, Emissions.

EC7823A:

Factory Mutual Approved: Report No. J.I.1V9A0.AF. 

IRI Acceptable.

Federal Communications Commission: 

Part 15, Class B, Emissions.

Form 

Number

Description

63-2278 Q7700A Network Interface Unit Product Data
65-0084 Q7800A,B 22-Terminal Wiring Subbase Product 

Data

65-0090 S7800A Keyboard Display Module Product Data.
65-0091 S7810A Data ControlBus Module™ Product Data
65-0095 S7820 Remote Reset Module Product Data
65-0097 221729C Dust Cover Packing Sheet
65-0109 R7824, R7847, R7848, R7849, R7851, R7861, 

R7886 Flame Amplifiers for the 7800 SERIES 

Product Data

65-0131 221818A Extension Cable Assembly Product Data
65-0229 7800 SERIES Relay Modules Checkout and Test

Содержание EC7823A









Отзывы: