This display is shown. The symbols and
are flashing to indicate the decorative fire is being
ignited.
After the decorative fire has been ignited, the
display below is shown.
The flame height can now be manually controlled.
Setting flame height
Press key
or
once. The display below is shown.
The value of the current flame height flashes.
Set the required flame height by pressing key
or
. Dependent on the key pressed, the symbol
or
is shortly visible on the display. The flame
height can be set between1 and 1.
Wait a few seconds or press key
to leave the menu.
Note: The flame height can only be controlled if the decorative fire has
been switched on.
