background image

CHAPTER

1

CN80 Mobile Computer Series User Guide

1

ABOUT THE COMPUTER FEATURES

This chapter introduces the Dolphin CN80 Mobile Computer. Use this chapter to 
learn about the basic computer features, functions, and accessories.

About the Dolphin CN80 Mobile Computer Series

Dolphin CN80 mobile computers, built on the Mobility Edge™ platform, deliver 
real-time connectivity, advanced data capture, and future-proof investment 
protection. A large touchscreen with the option to choose between a 40-key 
QWERTY keypad or 23-key numeric function keypad provides the flexibility to fit 
current and future application environments. All CN80 models are equipped for 
fast Wi-Fi connectivity with a WLAN 802.11 a/b/g/n/ac radio and Bluetooth (v5.0) 
technology that includes Bluetooth Low Energy (BLE) support. 

CN80L1N models provide additional connectivity with a wireless WWAN radio for 
high speed data and quality voice support across all network technologies. CN80 
WWAN models also include an integrated global positioning satellite (GPS) 
receiver that supports GPS protocols including, Simultaneous GNSS Receiver 
Support for GPS, GLONASS, Galileo, and BeiDou GPS.

CN80L0N models are available with either a N6603ER (1D/2D) high performance 
imager or an EX20 Near/Far (1D/2D) high performance 2D imager for long range 
scanning applications up to 15.2 m (50 ft).

Honeywell offers heater-equipped cold storage CN80 versions to extend the use of 
the mobile computer in cold storage and freezer environments as well as Non-
incendive (NI) CN80 versions for use in hazardous environments. 

Note:

Throughout this manual, all versions of the mobile computer are referred to as the 
CN80 unless information is specific to a particular model type.

Note:

The Settings app varies by computer model and OS version. Your computer may not 
include all of the features shown throughout the manual. 

Содержание CN80 Series





























































































































Отзывы: