EAGLEHAWK NX CONTROLLER – INSTALLATION & COMMISSIONING INSTRUCTIONS
EN1Z-1039GE51 R1218
14
Configuring Ports to Enable Webserver
Functions
The EAGLEHAWK NX controller provides webserver func-
tionality, e.g., for using the CentraLine N4 Supervisor. In order
to use webserver functions, the http and https standard port
settings must be changed as follows:
• http standard port 80 to 8080
• https standard port 443 to 8443
After the changes are done, the controller is reachable via
both pairs of ports, i.e., via the old standard ports and via the
newly set ports.
Procedure
1. In the COACH NX Nav tree, expand the Services folder,
and then double-click WebService.
RESULT: The Property Sheet Sheet displays to the right.
2. Expand the Http Port and Https Port options.
3. Change Http Port to 8080 and the Https Port to 8443.
4. Click the Save button at the bottom.
RESULT: The changed port settings are saved.
FINISHED!