Honeywell C7061A Скачать руководство пользователя страница 4

Страница: 4 / 16

EN1C-0015SZ20 R0602

STANDARDS AND APPROVALS

Models C7061A and F

C7061A and F Ultraviolet Flame Detector conform with
following EC-Directives:
• Gas Appliance Directive (90/396/EEC).“according to

European Standard:“EN298 approved with R7861 and
R7061 flame amplifiers.

• Low Voltage Directive (73/23/EEC)“according to European

Standard:“EN60730-2-5

• Electro Magnetic Compatibility Directive (89/336/

EEC)“according European Standards:“EN55011 class B
regarding emission.“EN50082-2 industrial level regarding
immunity.

Model C7061F

In addition to above information, C7061F conforms with:
• Explosive Atmospheres Directive (94/9/EC)“according to

European Standards:“EN50014“EN50018“EN50019

Other approvals (C7061A only)

Underwriters Laboratories Inc. Listed.
Canadian Standards Association Certified: Master File
LR95329-1.
Factory Mutual Approved: 14740.01.
lndustrial Risk Insurers Acceptable.

REPLACEMENT PARTS AND ACCESORIES

Replacement parts for model C7061A and C7061F

129464M Uttraviolet Sensing Tube.
129464N Ultraviolet Sensing Tube; for -40°F (-40°C)

operation.

190971B Coil and Shutter Assembly.

Replacement parts for model C7061A

114372

Quartz Viewing Window; rated for 20 Psi (138 kPa).

114465

Gasket, Silicone rubber; for installing viewing
window (three required).

120739

Gasket, fiber-neoprene; heat insulation and seal-
off for mounting flange.

Accessories for model C7061A and C7061F

118367A Swivel mount.
118369

Bushing, galvanized iron, with 3/4 inch NPT
internal threads on one end and 1 inch NPT
external threads on the other end. For adapting a

detector with 1 inch NPT internal threads (for
mounting) to a 3/4 inch sight pipe, or to the pipe
nipple and tee for connecting an air supply.

120934

Mounting Flange, aluminum, with 3/4 inch NPT
internal threads for attaching to sight pipe.

124198

Mounting Flange, aluminum, with 1 inch NPT
internal threads for attaching to sight pipe.

123539

Antivibrtation Mount.

124204

Quartz Focusing Lens, rated for 20 Psi (138 kPa);
for increasing the detector-sensed ultraviolet
radiation.

Accessories for model C7061A

122748

Quartz Viewing Window, rated for 50 Psi (345 kPa).

190105

Water Jacket.

Содержание C7061A

















Результаты поиска

Содержание C7061A

Отзывы:

Похожие инструкции для C7061A

Бренды по названию

Популярные бренды

Honeywell C7061A, Руководство по продукту

Результаты поиска

Содержание C7061A

Отзывы:

Похожие инструкции для C7061A

Бренды по названию

Популярные бренды