Honeywell C7015A Скачать руководство пользователя страница 2

SPECIFICATIONS 

ORDERING INFORMATION

Specifications

SUPER 

 MODELS

SUPER TRADELINE models offer features not 

 

TRADELINE or standard models, and are designed to
replace a wide range of Honeywell and competitive
controls. SUPER TRADELINE models are selected and
packaged to provide ease of stocking, ease of handling,
and maximum replacement value. Specifications of 
PER TRADELINE models are the same as those of
standard models except as noted below.

SUPER TRADELINE MODEL AVAILABLE:

 48 in. 

   leadwires; includes

 

 

 Bushing with

 

 105061 

and 

 Reducer Bushing.

SUPER TRADELINE FEATURES:

l

 plate (with 

 in. 

 mm] diameter 

agonal orifice) for reducing the detector field-of-view.

= Heat block for insulating the detector 

 sight pipe

temperatures higher than 

 F 

   and up to

 F   121” C].

Reducer bushing for mounting the detector on a   in.
sight pipe; specifically, for replacing 

 lead

 

 flame detectors.

SUPER TRADELINE pack with cross reference label
and special Instruction sheet.

STANDARD MODELS

MODELS: See Table 6 for flame safeguard controls and

associated amplifiers.

 RESPONSE: Responds to infrared radiation

with wavelengths between 0.75 and 1 .O micron.

LEAD SULFIDE PHOTOCELL: Photoconductor 

 decreases as incident radiant energy increases.

AMBIENT TEMPERATURE RATING: 

 F 

 C]

maximum at the lead sulfide photocell.

MOUNTING:

 Mount-knurled collar with 

 NPSM in-

 threads for mounting on a standard 

 in. pipe

(see fig. 1).

into socket in 

 (see Fig. 8).

TABLE l-MODELS AVAILABLE.

 0.125 in. 

 mm] diameter hexagonal orifice to 

 the detector field of view.

 insulate the detector from sight 

 temperatures higher than 

 F 

   and up to 

 F 

 

 mount the detector on a 

 in. sight pipe, specifically to replace 

lead sulfide infrared flame detectors.

Order Information

When purchasing replacement and 

 products from your Authorized Flame Safeguard Distributor or Wholesaler, refer to the

 Catalog or price sheets for complete ordering number, or 

 

 SUPER TRADELINE. if desired.

2.

4. Replacement parts, if desired.

Length of leadwires 

 or 96 in. 

 or 2.44 m]. 5. Accessories, if desired.

3. Lead sulfide cell order 

 

If you have additional questions, need further information, or would like to comment on our products or services, please write or phone:

1. Your local Honeywell Residential and Building Controls Division Sales Office (check white pages of phone directory).

2. Residential and Building Controls Division Customer Satisfaction

Honeywell Inc., 1885 Douglas Drive North
Minneapolis. Minnesota 554224386 (612) 542-7500

(In Canada-Honeywell 

 

 740 Ellesmere Road, Scarborough, Ontario 

 

 International sales and

service offices in all principal cities of the world. Manufacturing in Australia, Canada, Finland, France, Germany, Japan Mexico,
Netherlands, Spain Taiwan, United Kingdom, U.S.A.

2

Содержание C7015A
















Отзывы: