Honeywell AUTOCUBE 8200, Руководство пользователя

Страница: 31 / 56

AutoCube 8200 User Guide 23
Recommendations
• Packages need to be placed at least partially within the measurement area (see
Set Measurement Area on page 17).
• Packages need to be placed fully on the platform in the camera’s view. If not, an
error message will appear:
• Black, shiny, and transparent packages are not supported.
• The following irregular shapes are supported:
• Tube
• Triangular tube (prism)
• Cubes with an uneven top, sloped top, uneven side
Note: Tubes (cylinders and prisms) should not be orientated vertically.
• Stacked packages will be measured as one object.
• Can be used in typical office lighting, avoid direct sunlight. Light source must
not be directed toward the camera optics.
Log
All actions by the camera are recorded in the log and categorized as:
• Measurement—measurement information such as length, width and height. If a
scale is connected, weight will be shown as well.
• Info—system information such as ground plane set, system initialized, etc.
• Errors—system errors such as invalid measurement, out of range, etc.