Honeywell AUTOCUBE 8200, Руководство пользователя

Страница: 22 / 56

14 AutoCube 8200 User Guide
Launch the AutoCube Software
When you launch the AutoCube software the first time you must:
• Register your device
• Set up the AutoCube application
AutoCube Registration
Note: You must have administrative rights on the PC to complete the AutoCube
registration.
To complete AutoCube registration:
1. Launch the AutoCube software.
2. Click on Haven’t registered yet? Sign up and follow the screen prompts.
3. Enter your information in step 1. Enter the e-mail address that you want your ID
and password sent to. Click Next.
4. Enter your information in step 2, then click Register .
Wait while registration is in progress. When finished, you will see the Registra-
tion Initiated screen. An e-mail is sent to your e-mail address.
5. Check your e-mail. Open the verification e-mail and click on Get Started Now
to confirm your e-mail address.
6. Your registration information opens in your browser. Make sure the information
is correct, click Proceed .
7. A one time password (OTP) is sent to your phone number. Enter your OTP and
click Submit OTP .
8. Click I Agree on the End User License Agreement screen and then click
Proceed .
9. Create a password for your account. The password must include at least one
lower case letter, one upper case letter, one number, and one special character.
Click
Proceed .
10. Registration is complete. Close your browser.
Caution: Enter a valid e-mail address so that you are sure to receive your
ID and password.
Caution: Enter a valid phone number so that you are sure to receive your
one time password (OTP).