Honeywell AS302P Скачать руководство пользователя страница 39

Страница: 39 / 92

Operating & Maintenance Instructions

__________________________________________________________________________

Honeywell - M450 001 1D - 23.05.2019

21. COMMUNICATIONS

A Communications Hub complying with the DCC ICHI Specification may be mounted on the meter. The meter provides a
nominal 12V DC power supply for use by the Comms Hub and communicates to the Comms Hub using ZigBee protocol.

21.1. Local Communications Port

The meter does not support an Optical Port. No Non-Operational Interfaces are available from the meter.

21.2. Direct Communications Connection to the Comms Hub

The Comms Hub Interface allows provision for a Hardwired Interface between the Meter and the Module.

This feature is not supported by the AS302P meter.

21.3. HAN Communications Connections to the Comms Hub

The meter provides a HAN Interface that conforms to the following standards:

ZigBee Alliance as compliant with the ZigBee SEP v1.2b

Requirements described in the Great Britain Companion Specifications v1.1

This HAN Interface allows the meter to join a ZigBee SEP v1.2b Smart Metering Home Area Network which:

•

Operates within the 2400

– 2483.5 MHz Harmonised Frequency Band

•

Supports the Communications Links as follows:

Link to a Communications Hub

Communications Link with Type 1 Devices Type 2 Devices

•

Support Security Credentials for each device:

Add Security Credentials for Type 1 and Type 2

- Device Credentials are stored in a Device Log

- These will be verified

- Command and outcome are stored in the Security Log

Remove Security Credentials for Type 1 and Type 2 Devices

- Remove them from the Device Log

- Command and outcome recorded in the Security Log

Replace Security Credentials for Type 1 and Type 2 Devices

Maintaining the Command’s Transactional Atomicity

- Command and outcome recorded in the Security Log

•

Capable of Executing the Commands set out in GBCS

Immediate or future dated (UTC defined)

Future dated commands can be overwritten if they require cancelling, an appropriate response will be
sent to acknowledge this cancellation

All Commands received and their outcomes are logged in the Event Log

The meter capability includes

- Sending out commands as described in GBCS

- Receiving corresponding Responses

- Where required by a Response, taking the relevant action

- Control of HAN Connected Auxiliary Load Control Switches

Содержание AS302P





























































































Результаты поиска

Содержание AS302P

Отзывы:

Бренды по названию

Популярные бренды

Honeywell AS302P, Руководство по эксплуатации

Результаты поиска

Содержание AS302P

Отзывы:

Бренды по названию

Популярные бренды