Honeywell A700, Справочник по аппаратуре, Страница: 83 / 334

Registry Key
Default
Value
A730 A730x Description
CompositeABActivation 0x0
ü ü
Enables GS1 Composite with a CC-A or
CC-B (Micro PDF417) 2D component.
CompositeCActivation 0x0
ü ü
Enables GS1 Composite with a CC-C
(PDF417) 2D component.
CompositeGS1-128Emulation 0x0
ü ü
Enables emulation of the GS1-128
symbology.
Composite
LinearOnlyTransmissionMode
0x0
ü ü
Ignores the 2D portion and only
transmits the 1D bar code.
CompositeUnconventional 0x0
ü ü
Disable transmission of AIM identifier.
CompositeCodeMarkCC-AB 0x2a
ü ü
A single character inserted before the
bar code data to indicate the
symbology.
CompositeCodeMarkCC-C 0x2a
ü ü
A single character inserted before the
bar code data to indicate the
symbology.
UPCAndEAN
CompositeMessageDecoding
0x2
ü ü
Decode mode for EAN/UPC
composites, where
0 = never linked (only EAN/UPC
transmitted),
1 = always linked (2D component
required), and
2 = autodiscriminate.
CompositeABUDSI G0
ü ü
User-defined symbology identifier.
Range is 0-4 characters.
CompositeCUDSI G1
ü ü
User-defined symbology identifier.
Range is 0-4 characters.
IATA 2 of 5
Support for the parameters in the table is labeled as follows:
ü
= Parameter is supported and available via the Scanner Options tab in the device profile.
X = Parameter is not supported on this device.
NYI = Not Yet Implemented. These parameters should be considered unsupported, though
they can (with knowledge) be set via the CCI or advanced settings.
IMPORTANT
A730 and A730x support for symbologies and parameters may differ. Refer to the table
below for details.
The registry keys in the table below are located under:
[HKEY_LOCAL_MACHINE\Software\Vocollect\Imager\IATA 2 of 5]
61 Voice Device and Headset Hardware Reference Guide