Honeywell A700, Справочник по аппаратуре, Страница: 41 / 334

After a few seconds, the device says, "Powering off." The device turns off, and the LED indicator
light goes out.
Precautions
l
Do not remove the battery until the LED indicator is off. If you remove the battery when the
device is on or sleeping, any data collected could be lost.
l
You should not turn off the device if the LED indicator has a rotating red ring , unless it has
been rotating red for several minutes. If a device is turned off in this state, it may not be
ready to use when it is turned back on.
Loading an Operator's Templates on A700/A700x
You need a device with a charged battery, headset, and any other equipment (belt, bar code
reader) you are going to use. You must be within radio range.
Make sure the device is on or sleeping. The device should have a solid green ring segment (on) or
a rotating green ring (sleeping). If the device is off or sleeping, press the Play/Pause button.
1. Press the Operator button.The device says "Current operator is operator name. Select menu
item."
2. Press the + button or — button until the device says, "Change operator."
19 Voice Device and Headset Hardware Reference Guide