Honeywell A700, Справочник по аппаратуре, Страница: 66 / 334

Registry Key
Default
Value
A730 A730x Description
UnconventionalGS1-128 0x1
ü ü
Unconventional decoding mode
bitfield, where
bit 0 = allow decode of double FNC1,
bit 1 = FNC2 append disabled,
bit 2 = FNC4 ASCII extensions disabled.
Code128ReadingRange 0x1
ü ü
Enables Vesta algorithm decoding for
better read range.
Code128CodeMark 0x44
ü ü
A single character inserted before the
bar code data to indicate the
symbology.
GS1-128CodeMark 0x44
ü ü
A single character inserted before the
bar code data to indicate the
symbology.
Code128CheckDigitVerification 0x0
ü
X
Enables verification of French CIP
check digit.
Code128ReadingTolerance 0x0
ü
X
Enables verification of segment width,
where
0 = disabled,
1 = medium tolerance,
2 = low tolerance.
Code128BarCodeLengthL1 0x0
ü ü
Length value L1. Range is 0x0 to 0xFF
(0 to 255).
Code128BarCodeLengthL2 0x0
ü ü
Length value L2. Range is 0x0 to 0xFF
(0 to 255).
Code128BarCodeLengthL3 0x0
ü ü
Length value L3. Range is 0x0 to 0xFF
(0 to 255).
Code128BarCodeLengthMode 0x0
ü ü
Length verification mode, where
0 = "L1 is min length",
1 = "L1, L2, L3 are fixed lengths" – Not
supported on A730x,
2 = "L1 is min, L2 is max length".
GS1-128Identifier 0x1
ü
X
Enables transmission of AIM identifier
before the bar code data. This is
ignored if GTIN is active.
Code128SeparatorCharacter 0x1d
ü
X
Separator between multiple
concatenated bar codes.
Code128ConcatenationTransmission 0x0
ü
X
Multiple label concatenation, where
0 = disabled,
1 = only concatenated, and
2 = concatenate if possible.
Code128Concatenation 0x0
ü
X
Enables non-ISBT-compliant bar
codes to be concatenated.
Voice Device and Headset Hardware Reference Guide 44