background image

8 - 16

B - Output Image Height  

 

This option is used to size the image vertically.  If using this option, set the 
resolution (R) to zero.

D - Pixel Depth

This indicates the number of bits per pixel in the transmitted image, which 
defines whether it will be grayscale or black and white. 

8D

8 bits per pixel, grayscale image  

(default)

1D

1 bit per pixel, black and white image

F - File Format

This option indicates the type of file format in which to save the image.  

0F

KIM format

1F

TIFF binary

2F

TIFF binary group 4, compressed

3F

TIFF grayscale

4F

Uncompressed Binary

5F

Uncompressed grayscale

6F

JPEG image 

(default)

7F

Outlined image

8F

BMP format

H - Height of Signature Capture Area

The height of the signature capture area must be measured in inches divided 
by .01.  In the example, the height of the area to be captured is 3/8 inch, 
resulting in a value of H = .375/0.01 = 37.5.  

Example of Image Height set to 50B:

Example of Image Height set to 100B:

Example:   

IMGBOX245w

37h

55y.

Содержание 4600g

























































































































































































































































Отзывы: