ULTRAVIOLET SYSTEM
3
69-1859EFS—04
You can capture and minimize micro-organisms passing
through your forced air system when you combine your UV
System with a high-efficiency air filtration system like an
electronic air cleaner. Talk to your local heating and
cooling contractor about adding an electronic air cleaner
to complement your UV System and provide added
protection for you and your family.
BE SURE TO READ WARNINGS
AND CAUTIONS BEFORE
INSTALLING OR USING YOUR
UV SYSTEM
WARNING
UV Light Hazard.
Harmful to bare skin and eyes.
Can cause temporary or permanent loss of vision.
Never look at bulbs while illuminated.
View illumination only through light indicator
located on lamp handle.
To prevent exposure to ultraviolet light, disconnect
power to Ultraviolet System before servicing any
part of heating and air conditioning system.
Do not mount device in location that allows
ultraviolet light to be seen after installation.
Do not attempt to bypass duct mount switch.
Do not attempt to open housing; unit is sealed to
prevent ultraviolet light exposure.
CAUTION
Personal Injury Hazard.
Power supply can cause electrical shock.
Disconnect power supply before cleaning or
replacing ultraviolet bulb(s).
Do not open base unit or lamp handle; there are no
user-serviceable components inside.
CAUTION
Breakable Glass Hazard.
Can cause personal injury.
Be careful when inserting bulb(s) into lamp base.
Wear protective gloves when handling bulb(s).
CAUTION
UV Lamp Burn Hazard.
Harmful to bare skin.
Can cause severe burns.
Disconnect power 15 minutes before removing the
ultraviolet bulb(s).
MERCURY NOTICE
This device contains mercury in the sealed
ultraviolet bulb(s). Do not place your used bulb(s)
in the trash. Dispose of properly.
Broken Bulb Cleanup.
Do not use a household vacuum.
Sweep debris (phosphor/glass) into a plastic bag
and dispose of properly.
Contact your local waste management authority
for instructions regarding recycling and the proper
disposal of old bulb(s).
CAUTION
Equipment Damage Hazard.
Ultraviolet light can cause color shift or
structural degradation of plastic HVAC materials.
Select mounting location that prevents exposure to
plastic components with
unknown resistance to
ultraviolet light.
Three-feet minimum is
recommended between ultraviolet lamp and
plastic-fabricated devices (such as wires and non-
fiberglass media filters).
NOTE:
Most drain pans and humidifiers are UV-C resis-
tant. Consult Resideo’s UV exposure white paper,
Form No. 50-8788.
CAUTION
Sharp Edges Hazard.
Can cause personal injury.
Be careful when inserting ultraviolet device into the
sheet metal cutout.
Wear protective gloves when working near sheet
metal.
Содержание UV100A 1059
Страница 31: ...SISTEMA ULTRAVIOLETA 11 69 1859EFS 04 ...