3
HANDLING OF TRANSDUCER AND WATER TEMPERATURE SENSOR
• Work on the bard is too unstable and risky.
Installation and maintenance of transducer and water temperature sensor should be
done after you land and fix the boat.
Unless you keep it, human damage resulting in death or serious wound will occur.
DANGER
• Installation of the transducer or water temperature sensor inside the hull with adhe-
sive should be done while you ventilate well inside the boat.
Volatile gas from solvent or etc. causes to toxic symptoms.
• When you work using electric tools, please keep your hands dry.
If your hands are wet, it causes to electric shock.
• When you pull out or insert the plug of transducer or water temperature sensor,
please be sure to turn the power switch off.
It causes to electric shock.
• Perfect waterproof treatment should be done when you install the transducer or
water temperature sensor through the hull.
If waterproof is not sufficient, It causes to marine disaster because water come in.
WARNING
