33
COOLANT
Coolant Recommendation
The owner must properly maintain the
coolant to prevent freezing, overheating,
and corrosion. Use only high quality
ethylene glycol antif reeze containing
corrosion protection inhibitors specifically
recommended for use in aluminum
engines.
(SEE ANTIFREEZE CONTAINER LABEL).
Use only low-mineral drinking water or
distilled water as a part of the antifreeze
solution. Water that is high in mineral
content or salt may be harmful to the
aluminum engine.
Using coolant with silicate inhibitors may
cause premature wear of water pump
seals or blockage of radiator passages.
Using tap water may cause engine
damage.
The factory provides a 50/50 solution of
antifreeze and distilled water in this
motorcycle. This coolant solution is
recommended f or most operat ing
temperatures and provides good
corrosion protection. A higher
concentration of antifreeze decreases the
cooling system performance and is
recommended only when additional
protection against freezing is needed. A
concentration of less than 40/ 60 (40%
antifreeze) will not provide proper
corrosion protection. During freezing
temperatures, check the cooling system
frequently and add higher concentrations
of antifreeze (up to a maximum of 60%
antifreeze) if required.
