133
CLEANING
Clean your motorcycle regularly to protect
the surface finishes and inspect for
damage, wear, and oil, coolant or brake
fluid leakage.
Avoid cleaning products that are not
specifically designed for motorcycle or
automobile surfaces.
They may contain harsh detergents or
chemical solvents that could damage the
metal, paint, and plastic on your
motorcycle.
If your motorcycle is still warm from
recent operation, give the engine and
exhaust system time to cool off.
We recommend avoiding the use of high
pressure water spray (typical in
coinoperated car washes).
High pressure water (or air) can damage
certain parts of the motorcycle.
Washing the motorcycle
1. Rinse the motorcycle thoroughly with
cool water to remove loose dirt.
2. Clean the motorcycle with a sponge or
soft cloth using cool water.
Avoid directing water to muffler outlets
and electrical parts.
3. Clean the fairing, headlight lens and
other plastic parts using a cloth or sponge
dampened with a solution of mild
detergent and water. Rub the soiled area
gently rinsing it frequently with fresh water.
Take care to keep brake fluid or chemical
solvents off the motorcycle.
They will damage the plastic and painted
surfaces.
The inside of the headlight lens may be
clouded immediately after washing the
motorcycle. Moisture condensation inside
the headlight lens will disappear gradually
by lighting the headlight in high beam.
Run the engine while keeping the
headlight on.
NOTICE