Honda WH15 Скачать руководство пользователя страница 53

Страница: 53 / 68

TAKING CARE OF UNEXPECTED PROBLEMS

PUMP

No Pump Output

Low Pump Output

Possible Cause

Correction

Throttle lever not in the FAST
position.

Move the throttle lever to the FAST position.

Pump not primed.

Prime pump (see page 21).

Suction hose collapsed, cut, or
punctured.

Replace suction hose (see page 19).

Strainer not completely
underwater.

Sink the strainer and the end of the suction hose
completely underwater.

Air leak at connector.

Replace hose coupling packing if missing or damaged.
Tighten hose connector and clamp (see pages 19 and 20).

Strainer clogged.

Clean debris from strainer.

Excessive head.

Relocate pump and/or hoses to reduce head (see page 18).

Engine lacks power.

See page 50.

Possible Cause

Correction

Throttle lever not in the FAST
position.

Move the throttle lever to the FAST position.

Suction hose collapsed, damaged,
too long, or diameter too small.

Replace suction hose (see page 19).

Air leak at connector.

Replace hose coupling packing if missing or damaged.
Tighten hose connector and clamp (see pages 19 and 20).

Strainer clogged.

Clean debris from strainer.

Discharge hose damaged, too
long, or diameter too small.

Replace discharge hose (see page 20).

Excessive head.

Relocate pump and/or hoses to reduce head (see page 18).

Engine lacks power.

See page 50.

31YH66120.book 51 ページ２０２１年１月２０日　水曜日　午後８時３２分

Содержание WH15





































































Результаты поиска

Содержание WH15

Отзывы:

Бренды по названию

Популярные бренды

Honda WH15, Руководство пользователя

Результаты поиска

Содержание WH15

Отзывы:

Бренды по названию

Популярные бренды