manualshive.com logo in svg

Honda WH15, Руководство пользователя

Поделиться
Скачать
Honda WH15 Скачать руководство пользователя страница 21

19

OPERATION

SUCTION HOSE INSTALLATION

Use a commercially available hose and hose connector. The hose clamp is 
provided with the pump.
Most hoses come with the connectors already installed. The suction hose must 
be reinforced with a noncollapsible wall or braided wire construction and 
cannot contain any perforations.

The suction hose should be no longer than necessary. Pump performance is 
best when the pump is near the water level, and the hoses are short.

1. Verify that the hose coupling packing is in good condition.
2. Securely tighten the hose connector to the pump suction port.
3. Install the suction hose to the hose connector.

Use a hose clamp to securely fasten the suction hose to the hose connector in 
order to prevent air leakage and loss of suction.

4. Install the strainer (provided with the pump) on the other end of the suction 

hose, and secure it with a hose clamp. 
The strainer will help to prevent the pump from becoming clogged or 
damaged by debris.
Never operate the pump without the strainer installed.

Always use the included strainer or one with an equivalent mesh size. Operating 
the pump without a strainer may result in severe pump damage.

HOSE CLAMP

STRAINER

HOSE CONNECTOR
(Commercially available)

HOSE COUPLING PACKING

HOSE COUPLER

HOSE CLAMP RING

HOSE CLAMP

SUCTION HOSE
(Commercially available)

SUCTION PORT

31YH66120.book  19 ページ  ２０２１年１月２０日　水曜日　午後８時３２分

Содержание WH15





































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды