manualshive.com logo in svg

Honda WH15, Руководство пользователя

Поделиться
Скачать
Honda WH15 Скачать руководство пользователя страница 48

46

STORAGE

Long Term or Seasonal Storage (greater than 90 days)

Draining the Fuel Tank and Carburetor

<WH15XT>

1. Place an approved gasoline container below the carburetor, and use a funnel 

to avoid spilling fuel.

2. Move the fuel valve lever to the OFF position, loosen the carburetor drain 

bolt by turning 1 to 2 turns counterclockwise and drain the fuel in the 
carburetor.

3. Remove the sediment cup, and then move the fuel valve lever to the ON 

position and drain the fuel in the fuel tank.

Gasoline is highly flammable and 
explosive.

You can be burned or seriously injured 
when handling fuel.

• Stop the engine and let it cool before 

handling fuel.

• Keep heat, sparks, and flame away.
• Handle fuel only outdoors.
• Keep away from your vehicle.
• Wipe up spills immediately.

FUEL VALVE LEVER

ON

FILTER

O-RING (Replace)

SEDIMENT CUP

DRAIN BOLT

WASHER

31YH66120.book  46 ページ  ２０２１年１月２０日　水曜日　午後８時３２分

Содержание WH15





































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды