Honda FQ650, Руководство пользователя

Страница: 26 / 130

MAINTENANCE
3-5
AIR CLEANER CHECK/CLEANING/
REPLACEMENT
A dirty air filter will restrict air flow to the carburetor,
reducing engine performance. If the engine is operated
in dusty areas, clean the air cleaner more often than
specified in the MAINTENANCE SCHEDULE (page 3-
2).
Operating the engine without the air filters or with the
filter installed loosely will allow dirt to enter the engine,
causing rapid engine wear. Install the air filters
securely.
Remove the following:
– Wing nut [1]
– Air cleaner cover [2]
– Wing nut [3]
– Element Assy.
– Grommet [4]
– Inner filter (Paper) [5]
– Outer filter (Foam) [6]
Carefully check both filters for holes or tears and
replace if damaged.
Clean the filters if they are to be reused.
Installation is in the reverse order of removal.
Clean the foam element [1] in warm soapy water, rinse
and allow to dry thoroughly, or clean with a high flush
point solvent [2] and allow to dry thoroughly.
Do not twist the foam element.
Dip the foam element in clean engine oil [3] and
squeeze out all the excess oil.
Do not twist the foam element.
Excess oil will restrict air flow through the foam element
and may cause the engine to smoke at startup.
[1]
[2]
[3]
[4]
[5]
[6]
[2]
[3]
[1]