manualshive.com logo in svg

Honda Forza 300 2013, Руководство пользователя, Страница: 83 / 119

Поделиться
Скачать
Honda Forza 300 2013 Скачать руководство пользователя страница 83

80

Tr

ou
bles

hoo

ting

Overheating

The engine is overheating when the 
following occurs:

●

Coolant temperature gauge needle enter 
the H (Hot) range.

●

Acceleration becomes sluggish.

If this occurs, pull safely to the side of the 
road and perform the following procedure.
Extended fast idling may cause overheating.

1.

Stop the engine using the ignition switch, 
and then turn the ignition switch to the 
ON position.

2.

Check that the radiator fan is operating, 
and then turn the ignition switch to the 
OFF position.

Suspect a fault. Do not start the engine.
Transport your scooter to your dealer.

Allow the engine to cool with the ignition 
switch in the OFF position.

3.

After the engine has cooled, inspect the 
radiator hose and check if there is a leak. 

2

P. 71

Do not start the engine. Transport your 
scooter to your dealer.

4.

Check the coolant level in the reserve 
tank, and add coolant as necessary. 

2

P. 71

5.

If 1–4 check normal, you may continue 
riding, but closely monitor the high 
coolant temperature indicator.

NOTICE

Continuing to ride with an overheated engine can cause 
serious damage to the engine.

If the fan is not operating:

If the fan is operating:

If there is a leak:

Содержание Forza 300 2013
























































































































Отзывы:

Нет отзывов